For printing files, you can upload: JPG, JPEG, TIFF or single page flatten PDF.
Your design should fit the size of the print you ordered with no additional bleed but you need a margin of 1 inch all around the banner for finishing purposes. The margin is very similar to the previous mentioned but in this case the sewing depends on what size of pocket you chose, from 2 - 4 inches plus an extra inch for the sewing from the end of the design.
• Color Mode: CMYK (We do not print RGB, 5th, Spot or PANTONE)
• DPI: 72 - 150 (recommended for most jobs)
*If your design contains small elements or letters similar to a business card design we recommend 300 dpi. BUT WE DON’T recommend you to make all of your graphics at 300 dpi when it is not needed, since that will slow down your upload, your program and in general the production of your job.
The max size we print in one single panel is 10’x150’.
But we can attach banners if you need a bigger size.
Our banners are printed in full-color graphics at 720x720 resolution
If you are ordering hems or grommets in your banner you need to keep in mind the sewing around it we recommend to leave a margin of 1 inch in all edges of the banner design to prevent the sewing from cross paths with important text or elements in your design.
This banners are available on 14 oz vinyl banner.
You can choose between gloss or matte finishing.
When the size of the banner EXCEEDS 72 inches in width and height, we will print it on 14oz MATTE vinyl Only.
No, for a 2 sided banner, you can check out our 16 oz Vinyl Banner
Maximum Size
Minimum Size
Maximum Size
Maximum Size
Maximum Size